Casa Pescara Italiano

Kitchen · 3 min · Published

A kitchen service hatch for shut-off valves in San Giovanni Teatino

An illustrative renovation in San Giovanni Teatino keeps the shut-offs accessible behind a run of kitchen cabinets.

Illustrative scenario · A narrative example of work stages and final checks; it does not document an actual completed project.

Timber kitchen with a pale stone island
Illustrative image

The back panel covered a point that needed to stay accessible

In this illustrative case, a flat in San Giovanni Teatino received a new run of base units along the sink wall. The old shut-offs were visible once the kitchen had been removed, but the new cabinet drawing put them behind a fixed back panel. The household wanted deep drawers and a pull-out bin. With both in place, the plumber could not reach the required points without removing parts of the cabinetry. The conflict was found before the final order. The drawing then identified the connections that had to remain accessible, the parts that moved and the space needed to see and reach each point once the cabinet fronts were fitted.

The survey separated access from pipe position

The plumber checked which shut-offs were needed and where they could be reached during normal use. The cabinet supplier drew the unit interiors, showing usable depth, crosspieces and the travel of the runners. An opening behind the bin looked large enough on the floor plan until the mechanism arm occupied part of it. Moving the entire unit would have reduced the worktop beside the sink. The remaining option reached the connections from the side of an adjoining cabinet without taking the drawers out. Before approving it, the plumber checked its position relative to the existing fittings and the parts that needed to continue supporting the cabinet.

The hatch was designed as part of the cabinet

A removable panel would have been almost hidden inside the cupboard, but taking it out would mean emptying a shelf. A separate hinged hatch needed a wider opening and used part of the storage. The household compared the two footprints and gave the service point its own strip of space. The supplier checked materials, edge and hardware for the location and the cabinet instructions. The plumber verified that the intended parts could still be seen and reached. The drawing also showed where belongings could go without blocking the hatch. Giving up one piece of shelf meant access did not depend on how tidy the rest of the cupboard was.

The intermediate trial used the actual drawers

After the connections were prepared and before the back panel was closed, the coordinator checked dimensions with runners fitted and panels still accessible. The adjacent front opened farther into the area than the outline had suggested. The supplier updated the stop and checked the revised movement with the relevant professional. The plumber checked the connections before the cabinet was completed. Photographs recorded the position of the hatch and shut-offs, and the final drawing identified the components. The sequence left time to adjust the details while they were still visible. The household received a description of the service point that could also help a person visiting after handover.

Access remained available with the cabinet in use

During the illustrated handover, the coordinator showed how to reach the service area with the bin and everyday items in their agreed positions. They opened the neighbouring front, checked that runners stayed clear and explained how the shut-offs were identified. The household tried the hatch without handling connections and checked that the contents could stay where they were. The file included a view of the open cabinet and an image of the junction before closing. The arrangement worked because the maintenance space was part of the design. If the bin changes in future, the drawing shows what must stay clear of the new mechanism.

San Giovanni Teatino · CH · Abruzzo · Distance and service-area coverage ↗

How we prepare the guides: sources and illustrative scenarios