Casa Pescara Italiano

Bathroom · 3 min · Published

A washing machine in a bathroom alcove in Lanciano

An illustrative Lanciano bathroom checks the floor, connections and movement clearances before enclosing the washing machine.

Illustrative scenario · A narrative example of work stages and final checks; it does not document an actual completed project.

Travertine bathroom with a walk-in shower
Illustrative image

The alcove held the machine only while it was still

In this illustrative case, a Lanciano bathroom was renovated with a washing machine in an alcove near the basin. The first drawing showed the cabinet dimensions and two doors to conceal it. Once the supplier included the washer door and the space specified for connections, usable depth was less than the measurement from wall to doorway. The household explained that they normally unloaded into a basket to one side. The professional asked to check the floor, support and model instructions before closing the alcove. The drawing was updated with the room needed to use and service the appliance as well as its outside dimensions.

The survey separated access from the surface supporting the machine

After removing the old cabinet, the professional assessed the base and identified checks needed for the floor. The supplier showed where connections needed clearance and how the appliance could be taken out. One option kept full-height fronts and reduced access by the basin. Another left the front of the washer open and only used doors above it. The household stood where they would reach the basket with the washer door open. The team compared both arrangements against the installer’s requirements for support, ventilation and stability. Those checks preceded the cabinet selection, while there was still room to change the layout.

The finish followed the places they would clean

The tiler showed how the floor would continue into the recess and where the wall finish would meet the cabinet. The household preferred an edge they could clean without moving the machine during everyday use. The supplier showed a suitable finish sample and checked opening room for the upper doors. The scenario kept the washer visible and gave frequently used items a separate shelf above. The quote distinguished preparation, connection checks and cabinet fitting. The design also marked the route needed if the appliance had to be replaced with the basin in its final position. This kept the replacement route from being treated as unused space.

They tested the actual model before finishing the alcove

Once the floor was ready under the system instructions, the installer checked the support, position and connections. The coordinator checked the distance from the cabinet edge and tried the door with the basket. A small trim projection would have occupied part of the removal route. The tiler and supplier revised it before finishing. The professional carried out the checks for the actual model and verified that it cleared nearby fittings. The file kept connection locations and a picture of the base before the machine went in. The remaining doors were fitted after this check, when everyone could use the actual dimensions.

Handover repeated the movement with a basket

During the illustrated handover, the household used the door with an empty basket and checked the route towards the exit. The installer explained the model instructions and identified the points for future inspection. The coordinator checked that the nearby unit remained usable while loading and that the floor edge could be cleaned. The choice kept the lower opening clear and provided storage above. The final drawing recorded the opening needed to remove the machine and the appliance code. If the washer changes, the household can review access, support and the removal route before buying, using more than the nominal width of the recess.

Lanciano · CH · Abruzzo · Distance and service-area coverage ↗

How we prepare the guides: sources and illustrative scenarios