Casa Pescara Italiano

Kitchen · 3 min · Published

San Giovanni Teatino kitchen renovation with a dry spot for the kettle

An illustrative case about redesigning a drinks station after testing the route from the sink and the path of the lead.

Illustrative scenario · A narrative example of work stages and final checks; it does not document an actual completed project.

Timber kitchen with a pale stone island
Illustrative image

The spot nearest the sink created two crossings

In this illustrative San Giovanni Teatino case, the kitchen had been refurbished about fifteen years earlier. The kettle was filled at the sink and carried back to the socket across the area used for wet plates. With the lead plugged in, the kettle also stood in the path of the hand wiping the worktop. The first plan kept it there and replaced only the surface. At the survey, the movement was repeated with an empty, disconnected kettle. The designer marked two separate routes, one for the container and another for its lead. The electrician was asked to review the arrangement before the new worktop was specified.

Following the movement of taking out a cup

The team measured the clear worktop, cup location and swing of the wall cabinet door. One option moved the kettle away from the sink but below the door people used to get cups. With that door open it was awkward to lift the kettle. A second layout separated the drinks station from the dish-drying area and left the cabinet side free. The electrician checked the positions to consider for power. The worktop supplier received a sketch distinguishing the landing surface, edge to clean and space used when lifting the kettle to pour.

A tray of cups changed the landing position

The second mock-up kept the lead away from the path of wet dishes. Once a tray with two cups went onto the worktop, however, someone reached in front of the lead to take hold of the kettle. The tray moved to the other side and room was left for wiping around the base. The trial ran from opening the cupboard to setting down the still-disconnected kettle. The hand route was clear. The final drawing showed the chosen position and the tray. The arrangement was checked with everything in place before the order was confirmed, so the worktop was assessed as it would be used.

Checking the station after installation

The worktop went in and the electrician checked the intended supply. At handover, someone took a cup, opened the cupboard and moved the kettle along the agreed route. The position of the lead was observed with the appliance in place. A cloth reached the edge of the base without crossing the wet dish area. The sheet kept a photo of the worktop in use, the appliance reference and the places checked. A second picture showed the clear space in front of the socket so it could be recognised if the tray moved.

Testing a drinks station before choosing the worktop

Mark where you fill the kettle, take cups and leave wet plates. Have the socket position checked by an electrician. Try the sequence with the kettle empty and disconnected, including the lid, tray and wall cabinet door. At handover, repeat the movement and have the lead route confirmed in the agreed arrangement. Keep the drawing and appliance instructions. If you change models, compare its footprint and where the lead leaves the base before rearranging the worktop or moving items near the socket. Mark the side from which you wipe the worktop and where the tray goes after cleaning. Both positions help preserve the clear route checked at handover.

San Giovanni Teatino · CH · Abruzzo · Distance and service-area coverage ↗

How we prepare the guides: sources and illustrative scenarios