Casa Pescara Italiano

Home renovation · 3 min · Published

L’Aquila home renovation protecting a staircase during furniture deliveries

An illustrative case about surveying stairs, coordinating a delivery and checking step edges after the work.

Illustrative scenario · A narrative example of work stages and final checks; it does not document an actual completed project.

Entrance with a stone console and a light living room
Illustrative image

The floors were already covered when the stair came up

In this illustrative L’Aquila case, a renovation upstairs had to preserve the existing staircase. The first coverings were already down in the rooms where work would take place. During a visit with the furniture delivery crew, the longest package was compared with the turn in the stairs. Turning it on the landing would require raising one end while the other passed just above the edge of the first step. The earlier drawing showed only the width between the walls. The team added the places where packaging, the hands carrying it or the protective material itself might make contact. The step edges were photographed before they were covered.

A light mock package showed where clearance ran out

A lightweight mock-up was made to represent the package, and the turn was attempted without carrying a load. Held horizontally, the mock-up could not clear the handrail. When tilted, its lower edge came close to the most exposed step. The delivery information showed that parts of the furniture could go upstairs separately if the package was opened in an agreed empty room. The shorter remaining package made the turn with two carrying positions and no need to set it down midway. The unpacking space went onto the plan. The trial mainly changed the order of arrival, because the staging room had to be empty when the delivery came.

Keeping the route inspectable during the work

The stair protection followed the tested route, with particular attention to joins on the landing and to keeping the steps easy to see. Once it was in place, the mock-up made the trip again because the added thickness had changed some of the clearances. One edge near the last riser was visible only when coming down. The protection was adjusted and checked in both directions before materials came through. On delivery day, no boxes waited on the staircase. The unpacking point stayed downstairs, and a clear surface was prepared upstairs for each piece as it arrived.

The stairs stayed covered until the last carrying trip

The pieces went upstairs in the agreed order. Assembly took place upstairs without using the landing as a store. Empty packaging and the bulkier tools went out before the coverings came up. The inspection began with the edge the mock-up had nearly touched, to compare it with the survey photograph. Every step was then viewed with the staircase light on, walking both up and down. The inner wall of the turn, which had required separate protection, was checked as well. Only then did the last materials at the entry come out and the usual route go back into use.

Final inspection after restoring the normal route

The last trial used a shopping bag to see how the staircase felt in normal use after the coverings came off. The handrail and lights were accessible throughout the route again. Before and after pictures were matched by position, distinguishing the landing from the two steps beside it. The handover record said how the longest package had been split and where it was opened. The check covered the transport of those pieces and the condition of the existing edges, with a record of the decision that had avoided setting anything down along the turn. The downstairs room used for unpacking was left clear as well.

L'Aquila · AQ · Abruzzo · Distance and service-area coverage ↗

How we prepare the guides: sources and illustrative scenarios